Usage of a SwyxPhone S315 in a SwyxConnect Scenario (kb3651)
Le informazioni contenute nel presente articolo riguardano i seguenti prodotti:
- SwyxWare v6.20
- SwyxIt! v6.20
- SwyxIt! v6.12
- SwyxWare v6.12
- SwyxPhone S315
- SwyxConnect .
This article describes the support and the installation of a SwyxPhone S315 in a SwyxConnect scenario.
Requirements for the operation of SwyxPhone S315 in a SwyxConnect scenario:
- SwyxWare 6.12
- SwyxPhone S315 Firmware 6.06
- SwyxConnect Firmware 7.32.0002
If you want to use a SwyxPhone S315 behind a SwyxConnect in conjuction with a SwyxIt! (Dialer Mode) you have to use at least SwyxIt! version 6.12.0150. SwyxIt! 6.12.0150 is a quickfix version which is not available for public download.
Contact the Swyx Support to get access to this version.
The following telephony functions of the SwyxPhone S315 are supported in a SwyxConnect scenario:
- Display of the SwyxWare user name after a successful registration
- Intercom Calls
- Signalling of group calls
- Notification Calls
- SwyxIt! Dialer Mode
The following functions are not supported yet:
- Status signalling
- Voicemail signalling (Message Waiting Indication)
In the SwyxConnect Box please create a SIP user for the SwyxPhone S315 following the instructions in the SwyxConnect Quickstarts. To ensure the functionality in the fallback case use the MSN or extension (depending on the ISDN connection) additionally as User ID and User name (see screenshot).
Open the website of the SwyxPhone S315 entering the IP address of the phone in a web browser (e.g. http://192.168.2.100). Open the menu "SIP settings" and choose "Account settings". Enter the User ID and the User name which are already configured in the SwyxConnect Box.
Please check if the options "Message Waiting Indication" and "Presence" are deactivated (see screenshot). Both features are not supported in SwyxConnect using firmware 7.28.0031. Switch to "Server Settings" and enter the IP address of SwyxConnect as "Outbound Proxy" (see screenshot).
Click on "Submit" to save the changes. If the registration is successful in the display of the phone "S315" will appear and - after approx. two minutes - the name of the SwyxWare user.
If you want to use the S315 in conjunction with a SwyxIt! running in Dialer Mode you have to change further settings. Therefore open the menu entry "SIP-Settings -> Advanced Settings".
Determine the IP address of the machine which is running the SwyxIt! client. Enter the IP address into the field "Allow REFER from" and click on the "Submit" button. Therewith the configuration is complete.